Products
  Product News
  Spectrometers
  Probes
  Flow Cells
  Integrating Spheres
  Integrating Spheres
  Integrating Spheres
  Integrating Spheres
  Sample Holders
  Light Sources
   SL Predictor
   SL Calibration Workshop
   getSoft
   getSpec COLOR
   getSpec RAY
   getTemp
   GRAMS
   OOIBase32
   Spec Line
   Spec32
   SpectraSuite
  Fiber Optics
  Software
  Accessories
  Services

 Info Links
 Wavelength Ranges/Gratings
 Sample Spectra

   News
 






Informationen in deutsch





Informations en français





Информация на русском языке




HR4000 - High resolution spectrometer delivering resolution as precise as 0.02 nm FWHM




Request for information







The HR-4000 is a miniature fiberoptic spectrometer that has an impressively high optical resolution.
With the spectrometer, optical resolution to 0.02 nm (FWHM) is possible, depending on the optical bench options -- such as the slit size ( 5, 10, 25, 50, 100 or 200 µm wide slits) and the grating (see on the left side).

Featured application with this spectrometer
    • Laser characterization
    • Measuring gas absorbance
    • Determining atomic emission lines

The high-resolution miniature fiberoptic spectrometer features the following innovations:
    • Electronic Shutter: Open detector for 10 µs: Integration time is a setting in the software that is specified by the user. It's analogous to the shutter speed of a camera: the value specified for the integration time is the amount of time the detector "looks" at the incoming photons. Because the Toshiba detector has an electronic shutter, you can specify, via software, minimum integration time as short as 10 µs, which allow you to measure transient even like laser pulses. Also, the ability to integrate the spectrometer for brief durations eliminates saturation problems that can occur in high light-level applications such as laser analysis.
    • Programmable Microcontroller: The onboard programmable microcontroller provides you with considerable flexibility in controlling the spectrometer and accessories. Through a 30-pin connector, you can implement all operating parameters in the software: control light sources, create processes, and retrieve information on external objects. You have access to 10 user-programmable digital In/Outputs for interfacing to other equipment; one analog input and one analog output, and a pulse generator for triggering other devices.
    • Plug and Play operation: The spectrometer interfaces to a PC. PLC or other embedded controllers via USB 2.0 or RS-232 serial port. When using the serial port, the spectromter requires a single 5 Volt power supply. Data unique to each spectrometer are programmed into a memory chip on the spectrometer.
    • Inspite of the very high spectral resolution, the spectrometer dimensions are small (LWH: 14.3 cm x 14.2cm x 4.1 cm / 5.6" x 4" x 1.6")

Contact us to optimize the detailed product specification and to find your ideal system configuration. We are pleased to assist you in this matter. Click on "Info Links" (above left) for grating selection and sample spectra.


Technical Specification:
HR4000
DetectorToshiba 3648 element linear silicon CCD array
Pixel elements3648
Pixel size14 µm x 200 µm
Wavelength range200 - 1100 nm
Stray Light< 0.05 % @ 600 nm, < 0.10 % @ 435 nm
Integration time10 µs to 65 seconds
Data transfer rateFull scans into memory every 4 milliseconds with the USB 2.0 port, every 300 milliseconds with the serial port
InterfacesUSB 2.0, 480 Mbps (USB 1.1 compatible), RS-232 (2-wire) SPI (3-wire)
Fiber optic connectorSMA 905
Optical benchf/4, 101 mm / 4.0" focal length
Dimensions 14.9 x 10.5 x 4.2 cm / 5.9" x 4.1" x 1.7"


Last change 11/16/2007 11:17 AM
Copyright (c) getAMO 2024